Screw Air Compressor 3.2-40.1nm3/1.0MPa Air-Cooling Direct Connecting Compressor
The unique cold and hot chamber independent system design, internal layout more reasonable unit will distinguish the high temperature zone and low temperature, hot air fan is easily pulled out to ensure protection of the internal temperature and the ambient temperature of the motor is always relatively low.
Professional duct design improves compressor cooling system effects, so take advantage of the cooler heat transfer effect, see the machine always guaranteed low pressure state to use, improve fan life and efficiency.
Back into the air inlet of the motor, to ensure cooling of the motor is always cold, the best cooling effect of the motor, motor life is greatly extended.
Use of energy efficient host. Optimal system design, the whole is more efficient, and always ensure energy-efficient, energy-saving energy efficiency much higher than the national standard, when used to conserve electricity.
Europe's most advanced design concepts, the whole arrangement with upper and lower top efficient exhaust air duct system, hot air inside the box can be pulled out in the shortest time. Machine has no calories aside, which makes life longer.
The use of advanced oil subsystems, all stainless steel shell, never rust, good sealing, and also replace the oil and convenient. The unique double barrel design, two of the better separation, oil effect is better than similar products by 10 % or more.
Compressed stage: Single stage
Discharge temperature: Environment temperature+15º C
Starting model: Y- Δ
Drive model: Direct connecting
Colling system: Air-cooling
Note: 1, performance parameters measured in accordance with ISO1217, reference conditions: Inlet temperature 20 º C, inlet air pressure 1barA;
2, the Company reserves the right continues to improve the technology, parameter change without prior informed!
3, The noise value test is in the standard condition, there will be some difference for the different installation environment;
4, special specifications can be customized;
|Model ||Air discharge / Exhaust pressure|
|Power KW||Size mm|
|Weight KG||Size of outlet||Noise |
|ZG-30A||3.8/0.7 3.6/0.8 3.2/1.0 2.8/1.2||22||1300×800×1200||550||G1 1/4"||65±2|
|ZG-50A||6.8/0.7 6.2/0.8 5.6/1.0 4.9/1.2||37||1570×900×1300||950||G1 1/2"||65±2|
|ZG-60A||7.3/0.7 7.0/0.8 6.0/1.0 5.6/1.2||45||1620×950×1360||1110||G1 1/2"||70±2|
|ZG-75A||10.8/0.7 10.2/0.8 9.0/1.0 8.5/1.2||55||2050×1250×1700||1750||G2"||70±2|
|ZG-100A||13.5/0.7 12.6/0.8 11.2/1.0 10.0/1.2||75||2050×1250×1700||1820||G2"||70±2|
|ZG-120A||16.5/0.7 15.5/0.8 13.8/1.0 12.3/1.2||90||2340×1480×1820||2100||DN50||70±2|
|ZG-150A||21.5/0.7 20.5/0.8 17.5/1.0 16.2/1.2||110||2570×1620×2000||2800||DN65||70±2|
|ZG-175A||26.2/0.7 25.0/0.8 22.0/1.0 20.5/1.2||132||2570×1620×2000||3000||DN65||72±2|
|ZG-200A||28.7/0.7 27.6/0.8 24.6/1.0 21.5/1.2||160||2720×1750×2130||3300||DN65||72±2|
|ZG-250A||32.0/0.7 30.5/0.8 27.5/1.0 24.8/1.2||185||2720×1750×2130||3500||DN65||75±2|
|ZG-300A||36.7/0.7 34.5/0.8 30.2/1.0 27.8/1.2||220||3100×1950×2370||4700||DN80||78±2|
|ZG-350A||43.5/0.7 42.5/0.8 40.1/1.0 34.6/1.2||250||3100×1950×2370||5100||DN80||78±2|